33
Basic adjustment
Manual adjust
Configure various settings for each service using the
colour (R/G/Y/B) buttons.
Service
no.
Lock
Service
name
Lock CH skip Old LCN
CH skip SortDelete

Press a/b to select the desired service.

Press the colour button on the remote control

unit corresponding with the item you want to

reconfigure.

The 4 mark indicates the operation is set to on. Each
time the colour button is pressed, you can switch the
corresponding operation on/off.

Buttons for “Manual adjust” operation

Lock Press R button.
When the service is locked, you must enter your
PIN whenever you tune to the service.
CH skip Press G button.
Services with a 4 mark are passed over when
pressing :r/s on the TV or remote control unit.
Delete Press Y button.
The selected service is deleted. If you want to
watch the service you deleted once again, perform
“Auto installation”, “Additional search”, or “Manual
search”.
Sort Press B button.
The item position of services can be sorted.
Press a/b to select the service whose
item position you want to move, and then
press ;.
Press a/b to move it to the desired
position, and then press ;.
Repeat steps 1 and 2 until all desired
service items are sorted.
1
2
3

Cable

You can reconfigure the following settings when you
select “Cable” in the initial auto installation or the “Auto
installation” menu.
Additional search
Use this menu to add new services automatically after
“Digital search” in the “Auto installation” menu has been
completed. Follow steps 1 to 5 in Searching for
cable broadcasts on page 12.
E
1
2
•
E
Manual search
Add new services within a specified frequency band.
After setting the items on the following screen, the TV
starts searching.
Refer to the table about menu items in the right column
on page 12.
Frequency
Symbol rate
QAM modulation
Search start
MHz
Manual adjust
This function is the same as in “Terrestrial”. Refer to
“Manual adjust” in “Terrestrial”.
H
You can only reconfigure the “Manual adjust” settings.
You can only set the “Lock” setting in “Manual adjust”.

Satellite setting

Before selecting the type of search in “Satellite setting”,
you need to select the satellite broadcast.
SAT2 [Hot Bird 13E]
SAT3 [None]
SAT4 [Turksat]
Additional search
Use this menu to add new services automatically after
auto installation has been completed. Follow steps 1 to 6
in the right column on page 13.
Manual search
Add new services within a specified frequency band.
After setting the items on the following screen, select
“Yes” from “Search start” menu.
Band [Vert/Low]
Frequency
Symbol rate
Search start Vert/High
Horiz/Low
Horiz/High
Vert/Low
Manual adjust
This function is the same as in “Digital setting”. Refer to
“Manual adjust” in “Digital setting”.
E
•
E
•
•
E
E
E