32

Channel settings

Setup
Quick start
Auto installation
View setting
Channel settings
CH list
:Back:Enter
Menu
Individual setting
View setting

Auto installation

The TV automatically detects and stores all available
services in your area. This function also allows you to
perform the channel setting for digital, satellite and
analogue individually and reconfigure the settings after
the initial auto installation has been completed.
Go to “Menu” > “Setup” > “View setting” >
“Auto installation”.
Press c/d to select “Yes”, and then press
;.
Press a/b/c/d to select the desired
language, and then press ;.
NOTE
PIN input is required when executing “Auto installation”. The
default PIN is “1234”. To change the PIN setting, refer to
Password/Lock settings (Page 35). To clear the PIN setting
(PIN input will no longer be needed), refer to CLEARING THE
PIN (Page 52).
You cannot set the Home/Store setting and the country
setting in “Auto installation” in the “Setup” menu. If you want
to reconfigure those settings, automatically execute initial auto
installation after executing “Reset” from the “Setup” menu.
The current country setting is displayed on the screen.
Press a/b to select the broadcast standard
you want to search, and then press ;.
1
2
3
•
•
•
4

Digital search

After selecting the service you want to search,
either “Terrestrial” or “Cable”, refer to Digital
broadcast setting on pages 11_12.

Analogue search

The TV searches for, sorts and stores all the
receivable TV stations. Refer to Analogue
broadcast setting on page 12.

Satellite search

After selecting “Satellite search”, the current
DVB-S/S2 setting screen is displayed. Refer
to the “Satellite search” setting on pages
13_14.
NOTE
After selecting “Next” in the DVB-S/S2 setting screen, you need
to select your preferred satellite broadcast to start searching.
View setting

Programme setup

You can reconfigure the DTV service settings
automatically or manually.
Go to “Menu” > “Setup” > “View setting” >
“Channel settings” > “Programme setup”.
Press a/b to select the broadcast standard
you want to reconfigure, and then press ;.
NOTE
PIN input is required when executing “Programme setup”.
The default PIN is “1234”. To change the PIN setting, refer to
Password/Lock settings (Page 35). To clear the PIN setting
(PIN input will no longer be needed), refer to CLEARING THE
PIN (Page 52).

Digital setting

Terrestrial
You can reconfigure the following settings when you
select “Terrestrial” in the initial auto installation or the
“Auto installation” menu.
Additional search
Use this menu to add new services automatically after
“Digital search” in the “Auto installation” menu has been
completed.
Manual search
Add new services within a specified frequency band.
Enter the frequency using 0_9 numeric buttons.
You can perform “Manual search” with a service number only
when the five Nordic countries have been selected in the
country setting.
E
E
E
•
1
2
•
E
E
•
•
Basic adjustment