Pioneer AVIC-N5 operation manual Setting the automatic answering, Setting the automatic rejecting

	Chapter
Using the AV Source (Pioneer AV Equipment)	08

2Touch [Clear] on the right-hand side of the item that you want to clear memory for.

On this screen, you can select the following items:

Phonebook:

You can clear the registered phone book.

Dialled Calls:

You can clear the dialed call history list.

Received Calls:

You can clear the received call history list.

Missed Calls:

You can clear the missed call history list.

Preset Dials:

You can clear the registered preset dials.

pTouching [Clear] displays the confirmation message for clearing the memory.

pTouching [Clear All] clears all the data that correspond to the connected cellular phone.

3 Touch [Yes].

Data on the selected item is cleared from this navigation system’s memory.

pIf you do not want to clear memory that you have selected, touch [No].

Setting the automatic answering

If you set the automatic answering function on, the navigation system automatically an- swers all incoming calls.

%Touch [Auto Answer] in Function menu. Touching [Auto Answer] switches between [On] and [Off].

Setting the automatic rejecting

If this function is on, the navigation system automatically rejects all incoming calls.

%Touch [Refuse All Calls] in Function menu.

Touching [Refuse All Calls] switches between [On] and [Off].

p If both the automatic reject and automatic answer functions are set to [On], automatic reject is prioritized and all incoming calls are automatically rejected.

p If the [Refuse All Calls] is set to [On], re- jected incoming calls will not be stored in the missed call list.

Setting a ring tone

The navigation system offers to turn the ring tone for incoming calls on or off.

pThe ring tone you select for this navigation system has no effect on the ring tone used by your phone. If you do not want your phone and this navigation system to ring at the same time, we recommend you turn the ring tone off for one or the other.

%Touch [Ring Tone] in Function menu. Touching [Ring Tone] switches between [On] and [Off].

Setting the automatic connection

When automatic connection is active, the na- vigation system will automatically establish a connection with a registered phone when it comes into range. Using this feature will re- lease you from all of the processes for estab- lishing a connection.

pWith some cellular phones, it may not be possible to perform automatic connection.

pWhile you are operating in Function menu of hands-free phoning, this unit does not initiate an automatic connection to your re- gistered phone.

Using the AV Source (Pioneer AV Equipment)

En 123