Chapter
09
Customizing the AV Source Setting
pUse AV2 Input when connecting
Setting for rear view camera
The following two functions are available. The rear view camera feature requires a separately sold rear view camera (e.g.
Camera for backing up
The navigation system features a function that automatically switches to the
Camera for Rear view mode
[Rear View] can be displayed at all times (e.g. when monitoring an attached trailer, etc.) as a split screen where map information is partially displayed. Please be aware that in this setting, camera image is not resized to fit, and that a portion of what is seen by the camera is not viewable.
CAUTION
Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise screen image may appear reversed.
!Immediately confirm whether the display changes to a rear view camera image when the shift lever is moved to REVERSE (R) from another position.
!When the whole screen changes to a rear view camera image during normal driving,
switch to another setting.
pInitially, this function is set to [Off].
1 Touch [Camera] in System menu.
2Touch [Camera] to turn rear view cam- era setting on.
Touching [Camera] switches between [On] and [Off].
p Unless this setting is [On], you cannot switch to Rear View mode.
3Touch [Polarity] to select an appropriate setting for polarity.
Each time you touch [Polarity] switches be- tween the following polarity:
!Battery — When the polarity of the con- nected lead is positive while the shift lever is in the REVERSE (R) position
!GND — When the polarity of the connected lead is negative while the shift lever is in the REVERSE (R) position
Switching the auto antenna setting
If the blue lead of the navigation system is connected to the auto antenna of the vehicle, select either of the following settings:
!Radio — Extends the antenna only for the Radio source. The antenna is stored when the source is switched to another source.
!Power — Extends the antenna when the ignition switch is turned on. The antenna is stored when the ignition switch is turned off.
%Touch [Antenna Control] in System menu.
Touching [Antenna Control] switches be- tween [Radio] and [Power].
p Regardless of whether [Radio] or [Power] is selected, turning off the ignition switch will cause the antenna to automatically re- tract.
Setting the illumination color
The illumination color can be selected Blue or Red.
1 Touch [Illumi Color] in System menu.
