Nortel Networks Option 11C Mini manual Right ear bracket installed on the chassis

Page 132 of 332 Chapter 9 — Installing the chassis

3Attach the left ear bracket (marked with an “L”) to the holes on the left side of the chassis (near the front).

Use two #8-32 machine screws. Position the ear bracket so that the four holes on the bracket flange are nearer to the back of the chassis. To determine the front of the bracket, locate the “L”. This “L” must be at the top of the bracket and must face to the front of the chassis.

4Attach the right ear bracket (marked with an “R”) to the holes on the right side of the chassis.

Use two #8-32 machine screws. Position the ear bracket so that the four holes on the bracket flange are nearer to the back of the chassis. To determine the front of the bracket, locate the “R”. This “R” must be at the top of the bracket and must face to the front of the chassis. See Figure 34.

Figure 34

Right ear bracket installed on the chassis

Bracket flange marked

with an “R”. Attach this ear bracket to the right-

hand side of the chassis.

Attach the ear bracket to these holes.

5Place the chassis on the chassis guide brackets.

Carefully slide the chassis into the rack/cabinet until the ear brackets come to rest against the rack/cabinet support.

553-3021-209 Standard 3.00 April 2000