Nortel Networks Option 11C Mini manual Connecting telephones without a Pftu

Page 234 of 332 Chapter 17 — Connecting the telephones

Connecting telephones without a PFTU

Procedure 31

Connecting telephones without a PFTU

1Locate the telephone terminations on the cross-connect terminal.

2Connect one end of the cross-connect wire to the leads of the telephone.

3Locate the line card terminations on the cross-connect terminal. Refer to Table 49 on page 239.

4Connect the other end of the cross-connect wire to the assigned TN terminal block.

Table 52 on page 242 provides default DN assignments.

Now, you can activate the telephone, as described on page 244.

—————————— End of Procedure ——————————

Connecting analog (500/2500-type) telephones with a PFTU

Procedure 32

Connecting 500/2500-type telephones with a PFTU

1Locate the telephone terminations on the cross-connect terminal.

2Connect one end of the cross-connect wire to the leads of the telephone.

3Locate the PFTU connections (unit PFT 1 through PFT 5) assigned to this telephone at the cross-connect terminal.

Refer to Table 50 on page 239.

4Connect the other end of the cross-connect wire to the pair assigned to the telephone on the PFTU.

5Connect a second cross-connect wire to the pair assigned to the line card on the PFTU.

6Locate the line card terminations on the cross-connect terminal. Refer to Table 49 on page 239.

553-3021-209 Standard 3.00 April 2000