Nortel Networks Option 11C Mini manual Cross-connecting terminal Digital Subscriber Loops

Page 244 of 332 Chapter 17 — Connecting the telephones

Cross-connecting terminal Digital Subscriber Loops

Refer to ISDN BRI Administration and Maintenance Guide (553-3011-311) for a complete description of terminal Digital Subscriber Loops (DSL) cross- connecting and installation.

Activating telephones

Activating telephones is not difficult. Activate each telephone by performing a procedure on the telephone. Automatic Set Configuration is the software feature used to activate telephone sets.

Note: You cannot activate the data feature using the procedures in this chapter. To program a telephone with the data feature, configure it in LD 11 with Data Class of Service. See the X11 Software Administration Guide.

This chapter contains procedures for activating the following models of telephones:

•a default model with a default extension number

•a customized model with a customized extension number

This chapter provides these procedures for telephones with and without character displays.

Telephone tones

There are a number of different telephone tones. Table 54 includes tones that you hear during telephone activation. Table 55 includes tones that you hear during telephone activation in Germany.

553-3021-209 Standard 3.00 April 2000