OPEN CIRCUIT VOLTAGE/WIRE AND DISCONNECT SIZING

Maximum Open Circuit Voltage (Voc)

• Voc is the unloaded voltage generated by the solar array.

141 VDC

MX60 suspends operation to protect components

150 VDC

max open circuit voltage with the coldest environment (although the MX60

shuts down at 141 VDC, it can absorb up to 150 VDC from the array; anything higher than 150 VDC will damage the MX60)

•As every brand of panel is different, be sure to know the manufacturer’s specifi cations.

•Local temperatures vary seasonally and will affect panel voltage.

Hot weather: lower open circuit voltage/lower maximum power point voltage

Cold weather: higher open circuit voltage/higher power point voltage

Allow for ambient temperature correction using the following table:

25° to 10° C (77° to 50° F)

multiply by 1.06

9° to 0° C (49° to 32° F)

multiply by 1.10

-1° to -10° C (31° to 14° F)

multiply by 1.13

-11° to -20° C (13° to -4° F)

multiply by 1.17

-21° to -40° C (-5° to -40° F)

multiply by 1.25

Check the PV array voltage before connecting it to the MX60.

Wire and Disconnect Sizing

•The output current limit of the MX60 is 60 amps.

•Use a minimum of 6 AWG wire for the output between the MX60 and the batterry bus bar con- ductors; a larger size might be required due to temperature and/or conduit fi ll corrections.

•Install OutBack OBDC-60 or OBDC-80 amp breakers for disconnect and over current protection.

•The largest PV array that can connect to an MX60 should have a rated short-circuit current of 48 amps STC (Standard Test Conditions).

•Input conductors and circuit breakers must be rated at 1.56 times the short-circuit current of the PV array. OutBack OBDC 100% duty continuous breakers only need to be rated at 1.25 times the short-circuit current.

•Please see the wire Distance Chart and complete Wire and Disconnect Sizing on pages 80-82 for other suitable conductor/wire sizing.

OutBack Power Systems Inc.

9

Page 8 Page 10
Page 9
Image 9
Outback Power Systems MX60 Open Circuit VOLTAGE/WIRE and Disconnect Sizing, Wire and Disconnect Sizing, To 0 C 49 to 32 F
Page 8 Page 10

MX60 specifications

The Outback Power Systems MX60 is a state-of-the-art solar charge controller designed for off-grid and grid-tied systems, providing users with cutting-edge technology and efficiency in managing their solar energy resources. This device stands out in the renewable energy market due to its versatile features, robust performance, and ease of use.

One of the main features of the MX60 is its high-efficiency MPPT (Maximum Power Point Tracking) technology. This advanced technology optimizes the energy harvested from solar panels by adjusting the electrical operating point of the modules, allowing the system to extract the maximum available power. The MX60 can handle a considerable input voltage of up to 150 volts and offers a maximum output current of 60 amps, making it suitable for both small and large-scale installations.

The MX60’s robust architecture ensures its durability in harsh environmental conditions. With an operating temperature range of -40°F to 176°F, the charge controller performs reliably in varied climatic conditions, whether in extreme heat or bitter cold. This makes it an ideal choice for remote locations and rugged terrains where traditional power sources might be unreliable or unavailable.

An intuitive LCD interface equipped with a user-friendly display allows for easy monitoring and configuration. Users can track real-time performance metrics, including solar array voltage, output current, battery voltage, and charging status. The device is also equipped with advanced programmable settings, offering users complete control over charging parameters and battery maintenance.

Moreover, the MX60 incorporates essential safety features, including over-voltage and over-current protection, reverse polarity protection, and temperature compensation. Such safety measures are crucial in preventing damages to both the controller and the connected battery system.

The MX60 is compatible with various battery types, including Flooded, AGM, Gel, and Lithium, providing flexibility in energy storage options. It seamlessly integrates with Outback's Radian inverter systems, facilitating a comprehensive energy management solution for residential and commercial applications.

In summary, the Outback Power Systems MX60 is an exceptional choice for those looking for a reliable and efficient solar charge controller. Its combination of advanced technology, robust construction, and user-friendly features makes it an essential component for anyone interested in harnessing the power of solar energy.
Top Page Image Contents