Integra DTR-5.2 Connecting your video components, Connections, Connecting a DVD player DVD

Connections

12 V	MONITOR
TRIGGER	OUT

Video output

REMOTE

4. DVD playerCONTROL (DVD)

O CD OUT TAPE IN

S video output

L (White)

FRONT SURR CENTER

L

Analog audio output

R (Red)

R

SUB

Digital audio output (Coaxial)R MULTIWOOFER

T CHANNEL INPUT

DVD		VIDEO 1		VIDEO 2	VIDEO 3
IN	OUT		IN	IN	IN

VIDEO

VIDEO

S VIDEO

S VIDEO

L

R

OPTICAL COAXIAL

1 2 1 RS 232

2

DIGITAL INPUT

V Video output

S video

S video output

L (White)

Analog audio output

R (Red)

Digital audio output

(Coaxial)

5. VCR (VIDEO 1)

Video input

S video input

: Signal flow
Audio connection cable
Left (White)	L	Video connection cable
Right (Red)	R

R (Red)

Analog audio input L (White)

S Video connection cable

Video output

S video output

			12 V	MONITOR
7. TV monitor or Projector		TRIGGER		OUT
	Video input
(MONITOR OUT)
	S video input		REMOTE
		CONTROL
	ONO	CD	OUT TAPE IN
		FRONT	SURR	CENTER
			L
			R	SUB
	FER
		MULTI		WOOFER
	UT
		CHANNEL INPUT

DVD		VIDEO 1		VIDEO 2	VIDEO 3
IN	OUT		IN	IN	IN

VIDE

S VID

L

R

OPTICAL		COAXIAL
1	2	1	RS 232
		2

DIGITAL INPUT

L (White)	6. Satelite tuner, TV,
	or settop box
	(VIDEO 2 / VIDEO 3)
R (Red) Analog audio output

Digital audio output (optical)

Connecting your video components

Below is an example of how you can connect your video components to the DTR-5.2. Refer to the diagram above for the following connection examples.

The flow of the video signals is as follows:

•The signal that comes in from VIDEO IN is sent to VIDEO OUT.

•The signal that comes in from S VIDEO IN is sent to S VIDEO OUT

4. Connecting a DVD player (DVD)

If the device is equipped with an S video output terminal, connect it to the DVD S VIDEO IN terminal with an S video cable. If it does not have an S video output terminal, connect its video output terminal to the DVD VIDEO IN terminal using an RCA-type video connection cable. You do not need to connect to both the DVD S VIDEO IN and DVD VIDEO IN terminals.

Using an RCA-type audio connection cable, connect the audio output terminal on the device to the audio DVD IN jacks on the DTR-5.2. Make sure that you properly connect the left channel to the L jack and the right channel to the R jack.

If the device has a digital output jack as well, be sure to also connect it to either a DIGITAL INPUT (COAXIAL) or DIGITAL INPUT (OPTICAL) jack on the DTR-5.2 depending on the type of connector on the DVD player.

With the initial settings of the DTR-5.2, the DVD input source is set for digital input at the COAXIAL 1 jack.

If the digital connection is made at a different jack, this must be changed at the setup menu: Input Setup → Audio Setup → Digital Input (see page 29).

5. Connecting a video cassette recorder (VIDEO 1)

If the video cassette recorder is equipped with an S video output terminal, connect it to the S VIDEO 1 IN terminal with an S video cable. If it does not have an S video output terminal, connect its video output terminal to the VIDEO 1 IN terminal using an RCA- type video connection cable. You do not need to connect to both the S VIDEO 1 IN and VIDEO 1 IN terminals.

Using an RCA-type audio connection cable, connect the audio output terminal on the video cassette recorder to the same VIDEO 1 IN audio jacks on the DTR-5.2 and audio input terminal to the VIDEO 1 OUT audio jacks. Make sure that you properly connect the left channel to the L jack and the right channel to the R jack.

12