Integra DTR-5.2 IntelliVolume, 12V Trigger, Input Setup, “12V TRIGGER?” appears in the front

Input Setup

IntelliVolume

When switching input sources, you may find that the output level for different components or input sources connected to the DTR-5.2 is different even though the main volume setting is the same. Under normal circumstances, you would then have to change the volume setting each time you change the input source. This IntelliVolume allows you to preset a volume level for each input source separately so that when you do switch from one input source to another, the DTR-5.2 adjusts the volume accordingly so that the resulting volume stays the same.

1. Select the desired input source.

DTR-5.2

DVD Video 1 Video 2 Video 3 Tape FM AM Phono C D

VCR

12V Trigger

This setting allows you to make the required settings to turn on the output from the 12V TRIGGER terminal to control another component or device with the DTR-5.2 for each input source.

ON: Select to activate the device connected to the 12V TRIGGER terminal when the input source is selected.

OFF: Select when no device is connected to the 12V TRIGGER terminal or you do not want the connected device to activate.

1. Select the desired input source.

DTR-5.2

DVD Video 1 Video 2 Video 3 Tape FM AM Phono C D

VCR

Remote controller

Remote controller

2.Press the Setup (SETUP) button.

Turn the jog dial or press the and cursor buttons on the remote controller to display “2. INPUT SETUP”

3.Press the jog dial or ENTER button on the remote controller.

Turn the jog dial or press the cursor button on the remote controller to display “INTELLIVOLUME?”.

4.Press the jog dial or ENTER button on the remote controller.

The currently set volume level appears.

dB

5.Turn the jog dial or press the and

cursor buttons on the remote controller to set the IntelliVolume.

It can be adjusted between -12 and +12 decibels.

Setup

DSP/Mode ADJ

Push To Enter

DSP/Mode ADJ

Push To Enter

DSP/Mode ADJ

Push To Enter

DSP/Mode ADJ

Push To Enter

DSP/Mode ADJ

Push To Enter

2.Press the Setup (SETUP) button.

Turn the jog dial or press the and cursor buttons on the remote controller to display “2. INPUT SETUP”

3.Press the jog dial or ENTER button on the remote controller.

Turn the jog dial or press the and cursor buttons on the remote controller to display “12V TRIGGER”

4.Press the jog dial or ENTER button on the remote controller.

The currently setting appears.

5.	Turn the jog dial or press the and
	cursor buttons on the remote
	controller to set 12V TRIGGER.
6.	Press the Return (RETURN) button.
	“12V TRIGGER?” appears in the front

Setup

DSP/Mode ADJ

Push To Enter

DSP/Mode ADJ

Push To Enter

DSP/Mode ADJ

Push To Enter

DSP/Mode ADJ

Push To Enter

DSP/Mode ADJ

Push To Enter

Return

6. Press the Return (RETURN) button.	Return
“INTELLIVOLUME?” appears in the front
display.
To exit the setup mode immediately, press	Setup
the Setup (SETUP) button.

display.

To exit the setup mode immediately, press

the Setup (SETUP) button.

Setup

31