Using remote controller
ON STDBY
MD MODE
VOL
MUTING
MD
operation buttons
Numeric keys
ENTER
HOME THEATER CONTROLLER
Controlling an Integra/Onkyo MD recorder
The z connector of the Integra/ONKYO MD recorder must be connected to the
1.Press the MD MODE button.
The MD MODE button lights green.
2.Press the desired operation button.
The buttons shaded in the figure to the left are the operation buttons that can be used to control an Integra/Onkyo MD recorder.
Operation buttons:
ON: Turns on and off the MD player (same as STDBY button on the remote controller).
: Track down
: Track up
: Play
: Stop
: Fast reverse : Fast forward
REC/R: Record
: Pause
r: Eject the disc
1 to 9, 0, --/---: Numeric keys
ENTER: Enters the settings
You may also use the following buttons:
VOL : Adjusts the volume at the
MUTING: Activates the muting function at the
CABLE
SAT
VCR
TV
VOL
MUTING
SAT, CABLE, VCR, and TV MODE buttons
No preset codes are programmed into the SAT, CABLE, VCR, and TV MODE buttons. You can use these buttons to program the remote controller signals of other devices.
There are two methods. One method is selecting the name of a different brand from the table, entering the setting number listed, and calling up the
When in the SAT, CABLE and VCR mode, you may use the following buttons:
VOL : Adjusts the volume at the
MUTING: Activates the muting function at the
37