ADVANCED

The ADVANCED MENU allows fi ne-tuning of the MX60 operations including “Snooze” periods and Maximum Power Point limits. In order of appearance, the following modes occur in the ADVANCED Menu selections:

Snooze Mode Park Mpp (% Voc) MPP Range Limit % Voc

Sweep Interval Vbatt

Calibration Low CutOff MPPT Mode Absorb Time Limits

Wakeup Mode

Charger

Aux

Light

Eq

Misc *Advanced

Logging

Log2

 

EXIT

 

GO

ADVANCED MENU

Snooze Mode

< Lowcutoff

 

EXIT NEXT

MODE

From the MAIN Menu, choose Advanced and press the <GO> soft key.

The MX60 wakes up when an optimal amount of open circuit voltage (Voc) is available. The Voc varies with external conditions, primarily the weather and time of day, which affect solar panels. If the Voc is insufficient, the MX60 enters “Snoozing” until either a fi ve-minute (default) period passes or there is a 1.5 volt (default) increase in Voc at which point the MX60 reevaluates the Voc for recharging purposes. What is the optimal amount? The MX60 tries to recharge when the Voc is greater than the battery voltage by 2 volts, but voltage alone isn’t sufficient. An array might have a big increase in voltage fi rst thing in the morn- ing— more than 2 volts difference—but not enough ampacity to recharge.

Snoozing also occurs if the recharging current does not reach the user-selected cutoff current set point in the Lowcutoff menu. Press the <MODE> soft key for Snooze Mode options. Press the <NEXT> soft key for the Park Mpp screen

NOTE: There are four Low Cutoff options:

•<90% Voc—MX60 snoozes if Voc does not rise to greater than 90% of last measured Voc during a full sweep

•<50% Voc—snoozes if Voc does not rise to greater than 50% of last measured Voc during a full sweep

•<Lowcutoff—default snooze mode, snoozes if initial sweep does not reach Low Cutoff Amps during a full sweep

•Disabled—no snoozing, MX60 will cycle on and off many times (not recommended due to ongoing relay-clicking)

OutBack Power Systems Inc.

43

Page 42 Page 44
Page 43
Image 43
Outback Power Systems MX60 Charger Aux Light Misc *Advanced Logging Log2, Exit Advanced Menu, Snooze Mode Lowcutoff
Page 42 Page 44

MX60 specifications

The Outback Power Systems MX60 is a state-of-the-art solar charge controller designed for off-grid and grid-tied systems, providing users with cutting-edge technology and efficiency in managing their solar energy resources. This device stands out in the renewable energy market due to its versatile features, robust performance, and ease of use.

One of the main features of the MX60 is its high-efficiency MPPT (Maximum Power Point Tracking) technology. This advanced technology optimizes the energy harvested from solar panels by adjusting the electrical operating point of the modules, allowing the system to extract the maximum available power. The MX60 can handle a considerable input voltage of up to 150 volts and offers a maximum output current of 60 amps, making it suitable for both small and large-scale installations.

The MX60’s robust architecture ensures its durability in harsh environmental conditions. With an operating temperature range of -40°F to 176°F, the charge controller performs reliably in varied climatic conditions, whether in extreme heat or bitter cold. This makes it an ideal choice for remote locations and rugged terrains where traditional power sources might be unreliable or unavailable.

An intuitive LCD interface equipped with a user-friendly display allows for easy monitoring and configuration. Users can track real-time performance metrics, including solar array voltage, output current, battery voltage, and charging status. The device is also equipped with advanced programmable settings, offering users complete control over charging parameters and battery maintenance.

Moreover, the MX60 incorporates essential safety features, including over-voltage and over-current protection, reverse polarity protection, and temperature compensation. Such safety measures are crucial in preventing damages to both the controller and the connected battery system.

The MX60 is compatible with various battery types, including Flooded, AGM, Gel, and Lithium, providing flexibility in energy storage options. It seamlessly integrates with Outback's Radian inverter systems, facilitating a comprehensive energy management solution for residential and commercial applications.

In summary, the Outback Power Systems MX60 is an exceptional choice for those looking for a reliable and efficient solar charge controller. Its combination of advanced technology, robust construction, and user-friendly features makes it an essential component for anyone interested in harnessing the power of solar energy.
Top Page Image Contents