Nortel Networks Option 11C Mini manual 196 of 332 Installing and connecting SDI and Ethernet ports

Page 196 of 332 Chapter 15 — Installing and connecting SDI and Ethernet ports

NTAK02 SDI/DCH card

Only the Main Chassis supports the NTAK02 SDI/DCH card. You can configure this card to support ports for the following:

•two SDI and two DCHI

•one SDI, one DCHI, and two ESDI

•four ESDI

You can use the NTAK02 ports to access overlay software. Define these ports in the configuration database as the SDI logical type.

An NTAK19FB 4-port SDI cable is designed for use with the NTAK02 circuit card. However, you can use an NE-A25B 25-pair cable to extend the connections to the cross-connect terminal. See Tables 39 through 42 for the connections for each port.

553-3021-209 Standard 3.00 April 2000