Nortel Networks Option 11C Mini manual Observe the terminal screen

Page 216 of 332 Chapter 16 — Starting the Option 11C Mini and insta lling software

Procedure 29

Installing software

1Make sure the MSC card is in CPU slot (slot 0) of the Main Chassis.

For first-time installations, software is installed from the MSC card. Software is loaded on the MSC card before it is sent to the customer site.

2Observe the terminal screen.

One of two messages appear, and the software installation continues accordingly. If the message is:

INSERT SOFTWARE DELIVERY CARD

Go to Step 3.

OR if the following is displayed:

SOFTWARE INSTALLATION PROGRAM go to Step 4 on page 217.

3Skip this step unless you are using the Software Delivery (PCMCIA) to install the software.

If you have not already done so, install the Software Delivery card in Slot A in the socket in the faceplate of the MSC card.

Note: You do not have to turn off the system power before you install the Software Delivery card in Slot A.

See Figure 64.

Insert the card in slot A in the PCMCIA socket located in the faceplate of the NTDK97 MSC card. Carefully press on the Software Delivery card until it is firmly seated. See Figure 64.

553-3021-209 Standard 3.00 April 2000