INSTALLATIONS

Installing the Memory (DIMM)

The I815E board supports one 168-pin DIMM socket for a maximum total memory of 256MB in SDRAM type. The memory module capacities supported are 32MB, 64MB, 128MB and 256MB.

Installing and Removing DIMMs

To install the DIMM, locate the memory slot on the board and perform the following steps:

1.Hold the DIMM so that the two keys of the DIMM align with those on the memory slot.

2.Gently push the DIMM in an upright position until the clips of the slot close to hold the DIMM in place when the DIMM touches the bottom of the slot.

3.To remove the DIMM, press the clips with both hands.

Lock

DIMM

Lock

Lock

Lock

Top View of DIMM Socket

I815E User’s Manual

7

Page 11
Image 11
Intel I815E user manual Installing the Memory Dimm, Installing and Removing DIMMs, Lock, Top View of Dimm Socket