
BIOS SETUP
Integrated Peripherals
This section sets configurations for your hard disk and other integrated peripherals.
CMOS Setup Utility – Copyright © 
Integrated Peripherals
  | 
  | 
  | 
  | 
  | 
  | 
  | PCI IDE  | Enabled  | ITEM HELP | 
  | |
  | Enabled  | Menu Level  | 
  | ||
  | IDE Primary Master PIO  | Auto  | 
  | 
  | |
  | IDE Primary Slave  | PIO | Auto  | 
  | 
  | 
  | IDE Secondary Master PIO  | Auto  | 
  | 
  | |
  | IDE Secondary Slave PIO  | Auto  | 
  | 
  | |
  | IDE Primary Master UDMA  | Auto  | 
  | 
  | |
  | IDE Primary Slave  | UDMA | Auto  | 
  | 
  | 
  | IDE Secondary Master UDMA  | Auto  | 
  | 
  | |
  | IDE Secondary Slave UDMA  | Auto  | 
  | 
  | |
  | USB Controller  | 
  | Enabled  | 
  | 
  | 
  | USB Keyboard Support  | Disabled  | 
  | 
  | |
  | Init Display First  | 
  | PCI Slot  | 
  | 
  | 
  | AC97 Audio  | 
  | Auto  | 
  | 
  | 
  | IDE HDD Block Mode  | Enabled  | 
  | 
  | |
  | POWER ON Function  | BUTTON ONLY | 
  | 
  | |
  | KB Power ON Password  | Enter  | 
  | 
  | |
  | Hot Key Power ON  | 
  | 
  | 
  | |
  | Onboard FDC Controller  | Enabled  | 
  | 
  | |
  | Onboard Serial Port 1  | 3F8/IRQ4  | 
  | 
  | |
  | Onboard Serial Port 2  | 2F8/IRQ3  | 
  | 
  | |
  | UART Mode Select  | 
  | Normal  | 
  | 
  | 
  | UR2 Duplex Mode  | 
  | Half  | 
  | 
  | 
  | Onboard Parallel Port  | 378/IRQ7  | 
  | 
  | |
  | Parallel Port Mode  | 
  | SPP  | 
  | 
  | 
  | ECP Mode Use DMA  | 3  | 
  | 
  | |
  | Game Port Address  | 
  | 201  | 
  | 
  | 
  | Midi Port Address  | 
  | 330  | 
  | 
  | 
  | Midi Port IRQ  | 
  | 10  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
OnChip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface with support for two IDE channels. Select Enabled to activate each channel separately.
IDE Primary/Secondary Master/Slave PIO
These fields allow your system hard disk controller to work faster. Rather than have the BIOS issue a series of commands that transfer to or from the disk drive, PIO (Programmed Input/Output) allows the BIOS to communicate with the controller and CPU directly.
The system supports five modes, numbered from 0 (default) to 4, which primarily differ in timing. When Auto is selected, the BIOS will select the best available mode.
36  | I815E User’s Manual  |