I X . S E T - U P , A D J U S T M E N T & U S E

K. SUSPENSION SEAT

There are three spring rates to choose from for the Quickie P300 suspension seat: Light for riders weighing 100-150 lbs. Medium for riders weighing 150-200 lbs. Heavy for riders weighing 200-250 lbs.

1. Suspension Spring Adjustment

The suspension seat is shipped from Sunrise with no preload placed on the spring.

a) To reduce stiffness turn nut (B) clockwise.

2. Limited Weight Adjustments Limited weight adjustments can be made by: a) Remove the lower bolt nut (C ) from

the spring shock assembly.

b) Reposition the bolt/nut in one of several holes provided in the motor plate.

Note: To avoid seating problems do not over adjust the anterior tilt.

3. Controller Access

Access to the controller and other items located under the seat can be achieved by: a) Remove bolt (C ) from both sides

of the chair.

b) Tip seat frame forward.

Note: Reposition the joystick so it does not hit other parts of the chair.

L.WheelHEELlocksLOCKSare installed by Sunrise when requested on the Quickie P300.

Use a torque setting of 100 in./lbs when setting up or adjusting wheel locks.

1.Adjustment

a)Loosen the screw on the side of each clamp. Do not remove the screw.

b)Slide assembly toward rear wheel until clamp embeds into tire to prevent wheel movement, when in locked position.

c)Tighten screws.

B

C

33

930317 Rev. C

 

 

Page 33
Image 33
Sunrise Medical P300 instruction manual Suspension Seat, Suspension Spring Adjustment, Controller Access