X . O P E R A T I N G
E.TheJOYSTICKremote joystickASSEMBLYassembly connects to a microprocessor, which controls the chair’s performance.The remote box consists of the following parts:
1.UseSp edthisControlknob to Knob:adjust the maximum speed of your chair.Turn it
2.Battery Charge Indicator:
•Green lights indicate that batteries are fully charged.
•Yellow lights indicate that batteries need recharging.
•When the lights stay in the red band, the batteries must be recharged.
G U I D E |
|
4 | 2 |
5 |
|
1 |
|
3 |
|
3. TheOn/Offon/offButton:switch must be located so it is accessible to the rider, but not in a position that it may be accidently turned off while the chair is moving.The on/off switch is located on the rear of the joystick box when shipped. Ask your authorized supplier for alternate locations.
4. Joystick:
The joystick controls the direction and speed of your chair.Turn the chair on and move the joystick in the direction you want to go.
• Moving the joystick from the neutral (center) position disengages the motor locks, allowing the chair to move.
• The chair will move faster the more you move the joystick away from neutral.
Note: If your speed becomes hard to manage, release the Joystick and the chair will come to a complete stop.
• When you release the joystick it will return to neutral; the chair will slow to a stop and the motor locks will reengage.
• We recommend that you switch the chair off if you stop for any length of time.This will conserve battery power.
Note: Once the chair stops, switching the chair off will not affect the motor locks.
5.MakeJoysticksureBoot:the boot is not torn or cracked (this could allow water or moisture to enter). If the boot is torn or cracked, replace it as soon as you can.
930317 Rev. C
38
