Sunrise Medical P300 Check-Out, If you have any problems, follow these procedures

I X . S E T U P , A D J U S T M E N T & U S E

M.CHECK-OUT

Once the wheelchair is assembled and adjusted, it should roll smoothly and easily. All accessories should also perform smoothly.

After the wheelchair has been set up be sure the chair performs to your specified operational settings (see pages 35-38). If the chair does not perform to specifications, turn the wheelchair OFF immediately and reprogram operational specifications.

Repeat this procedure until the wheelchair performs to specifications before attempting active use of the wheelchair.

If you have any problems, follow these procedures:

1.Review the set-up and check-out section and operating guide to make sure chair was properly prepared.

2.If your problem persists, contact your authorized supplier.

If you still have a problem after contacting your authorized supplier, contact Sunrise customer service. See the introduction page for details on how to contact your authorized supplier or Sunrise customer service.

930317 Rev. C

34