Sunrise Medical P300 instruction manual Seat Frame, Folding Backrest, Seat Depth

I X . S E T U P , A D J U S T M E N T & U S E

H. SEAT FRAME

A 12º angle-adjustment is standard on all Quickie P300 wheelchairs.

1. Adjustment

a) Remove the front securing bolt (A) on the side of the backrest hinge plate.

b) Loosen the lower rear bolt (B)

c) Set at desired angle.There are four holes ( in 4º increments) to choose from.

d) Reinstall the front bolt and tighten both bolts securely.

Note: Adjustment on both sides of the wheel- chair must be exactly equal.

I.FOLDING BACKREST

Quickie P300 wheelchairs are shipped with backrest in folded position.

1.Upright Positioning

a)Lift backrest to upright position so that latch handles (C) lock into place.

b)Backrest is ready for use.

2.Folding Backrest

a)Lift and turn backrest latch handles

(C) outward.

b)Fold backrest forward.

CAUTION: Backrest latches must be locked into place before operating wheelchair.

J. SEAT DEPTH

The seat depth can be adjusted in one inch increments.

1. Seat Frame Adjustment

a) To adjust, remove the two bolts (A) from each side of the backrest pivot plate.

b) Reposition the backrest to the desired position.

c) Replace and retighten bolts on each side of the backrest pivot plate.

Note: Adjustment on both sides

of the wheelchair must be exactly equal.

A

B

C

A

930317 Rev. C

32