Sherwood Complete Guide to RX-772 Stereo Receiver Specifications

Specifications

� AMPLIFIER SECTION

�Power output, stereo mode, 8 Ω, THD 0.08 %, 20 Hz~20 kHz	2X100 W
�Total harmonic distortion, R/O TO -3 dB, 20 Hz~20 kHz	0.02 %
�Input sensitivity, 47 kΩ
Phono (MM)	2.5 mV
Line (CD, Tape)	200 mV
�Signal to noise ratio, IHF “A” weighted
Phono (MM)	80 dB
Line (CD, Tape)	100 dB
�Frequency response
Phono (MM) RIAA, 10 Hz ~ 100 kHz	±1 dB
Line (CD, Tape), 10 Hz~100 kHz	±3 dB
�Output level
TAPE/VIDEO OUT, 2.2 kΩ	200 mV
�Bass/Treble control, 100 Hz/10 kHz	±10 dB

� FM TUNER SECTION

�Tuning frequency range	87.5~108.0 MHz
�Usable sensitivity, S/N 30 dB	5 dBμV
�50 dB quieting sensitivity, mono/stereo	15/35 dBμV
�Signal to noise ratio, 60 dBμV, mono/stereo	70/65 dB
�Total harmonic distortion, 60 dBμV, 1 kHz, mono/stereo	0.5/0.8 %
�Frequency response, 40 Hz~14 kHz	±3 dB
�Stereo separation, 1 kHz	35 dB
�IF rejection ratio	80 dB

� AM TUNER SECTION

�Tuning frequency range	522~1611 kHz
�Usable sensitivity, S/N 20 dB	55 dBμ/m
�Signal to noise ratio	45 dB
�Selectivity	23 dB

� GENERAL

�Power supply	230 V ~ 50 Hz
�Power consumption	350 W
�Switched AC outlet	Total 100 W (0.43A) max.
�Dimensions (W×H×D, including protruding parts)	440×160×415 mm(17-3/8×5-1/2×16-3/8 inches)
�Weight (Net)	10.7 kg(23.59 lbs)

Note: Design and specifications are subject to change without notice for improvements.

23