Presetting radio stations
• You can store up to 30 preferred stations in the memory.
1. Tune in the desired station with auto or manual tuning.
2. Press the MOMORY button.
• The "M" (memory) is flickering for 5 seconds.
3. Select the desired preset number (01~30) and press the MEMORY button.
•The station has now been stored in the memory.
•A stored frequency is erased from the memory by storing another frequency in its place.
•If the "M" disappears, start again from the above step 2.
4. Repeat the above steps 1 to 3 to memorize other stations.
�MEMORY BACKUP FUNCTION
The following items, set before the receiver is turned off, are memorized.
•INPUT SELECTOR settings
•Preset stations,etc.
•Tone (treble and bass) and balance settings.
Tuning in preset stations | Scanning preset stations in sequence | |
|
|
|
• After selecting the tuner as an input source, select the desired preset number.
• The receiver will start scanning the stations in the preset sequence and each station is received for 5 seconds.
• At the desired station, press this button again to stop scanning.
16
