Operations
LISTENING TO A PROGRAM SOURCE
Before operation
∙Push the POWER switch.
• This unit enters the standby mode and the STANDBY indicator lights up in amber.
This means that the receiver is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness.
• To switch the power off, push the POWER switch again. Then the power is cut off and the STANDBY indicator goes off.
1. In the standby mode, turn the power on.
�When the POWER ON button on the remote con- trol or the BAND button on the front panel is pressed, this unit is turned on to enter the operat- ing mode (the STANDBY indicator lights up in blue).
�In the standby mode, if an INPUT SELECTOR but- ton on the remote control is pressed, the unit is turned on automatically and the desired input is selected.
�In the operating mode, when the STANDBY button on the remote control is pressed, then it enters the standby mode.
2. Switch the desired speakers on.
�Then the corresponding speaker indicator ("A" or/and "B") lights up and the sound can be heard from the speakers connected to the selected speaker terminals.
�When using the headphones for private listening, press the corresponding SPEAKER button to switch off both A and B speakers.
11
