1.POWER SWITCH

Push this switch to enter the standby mode. To switch the power off, push again this switch.

2.POWER ON BUTTON

In the standby mode, when this button is pressed, the unit is turned on to enter the operating mode.

When the BAND button on the front panel is pressed, the unit is turned on, too.

3.STANDBY BUTTON

In the operating mode, when this button is pressed, the unit is turned off to enter the stnadby mode.

4.STANDBY INDICATOR

5.HEADPHONE JACK

Stereo headphones with a standard 1/4 inch plug can be plugged into this jack for private listening.

6.INPUT SELECTOR KNOB/BUTTONS

Rotate the INPUT SELECTOR knob or press the button to select the desired input source.

7.BAND BUTTON

Each time this button is pressed, the band changes as follows.

FM STEREO FM MONO AM

8.SPEAKER A, B SELECTOR BUTTONS/INDICATORS These buttons allow you to select various combinations of speakers as follows:

To drive A speakers, press only the SPEAKER A but- ton ("A" indicator lights up).

To drive B speakers, press only the SPEAKER B but- ton ("B" indicator lights up).

To drive both A and B speakers, press the SPEAKER A and B buttons.("A" and "B" indicators light up).

When using headphones for private listening, press these buttons to switch off the speaker A and B ("A" and "B" indicators go off).

9.DIMMER BUTTON

Press this button to select the brightness of the fluorescent displays as desired.

Each time this button is pressed, the brightness of all fluorescent displays of this unit and Sherwood CD player shch as CD-772, etc. connected by the DIGI LINK changes together as follows:

ON dimmer OFF

10.SLEEP BUTTON

Press this button to activate the sleep timer for a specified period of time.

Each time this button is pressed, the sleep time changes as follows:

10 20 30 ���� � 90 OFF

Unit : minutes

11.TONE BUTTON

Press this button to listen to a program source with the tone effect or not.

12.TREBLE UP/DOWN (/) BUTTONS Adjust the treble as desired with these buttons.

13.BASS UP/DOWN (/) BUTTONS

Adjust the bass as desired with these buttons.

14.VOLUME CONTROL KNOB, UP/DOWN ( /)

BUTTONS

Adjust the volume to a comfortable listening level with this knob or these buttons.

15.MUTE BUTTON

Press this button to temporarily mute the sound. Press again to resume the previous sound level.

16.MEMORY BUTTON

Press this button to store stations.

17.TUNING UP/DOWN (/▼, +/-) BUTTONS Press these buttons to tune in the desired stations.

18.PRESET UP/DOWN (/▼, +/-) BUTTONS

Press this button to select the preset stations.

19.PRESET SCAN BUTTON

Press this button to scan the stations in the preset sequence.

20.MODE BUTTON

Each time this button is pressed, the mode changes as follows :

SPEAKER (TONE : ON BASS TREBLE) or

BALANCE ( TONE : OFF)

21.SELECT KNOB

At the desired mode, rotate this knob to adjust it as desired.

22.FLUORESCENT DISPLAY

23.REMOTE SENSOR

24.RDS BUTTONS (Regional option for Europe, etc.) Use these buttons when listening to RDS broadcast. For more information, refer to pages 17~19.

25.CD PLAYER SECTION

- to stop play ■■ - to pause play - to begin play

REPEAT - to play a track, disc, etc. repeatedly REPEAT A/B - to play a specific part (A to B)repeatedly ■◀◀, ▶▶■ - to skip backward or forward

9

Page 10
Image 10
Sherwood RX-772 manual Input Selector KNOB/BUTTONS