SPECIFICATION FOR DOMESTIC WATER HEATERS
Condensing, Low NOx,
(continued)
Safety Controls
As a minimum, the heater will be equipped with the following:
•a
•two immersion operating thermostats
•an immersion temperature limiting device
•a stack temperature limiting device
•an ASME- or
•and options as selected on form PV 6435
Warranty Summary
The burner and all heater parts will have a
labor and freight costs under certain conditions. Initiation and /or continuation of warranty coverage will not be dependent upon annual inspections, regular replacement of anode rods, or water chemistry. Complete copies of all warranties and service policies, including all exclusions and conditions, will be presented to the owner as part of the submittal package. These summaries are not warranties. Consult warranty and policies for full details.
Finishing
The storage and heating sections will be completely factory packaged on a single skid, requiring only job site hookup to utilities, venting, and water inlet and outlet piping. The heater will be insulated, jacketed with steel panels finished with an
Start Up
Start up on the unit will be performed by factory trained and authorized personnel. A copy of the start up report will be provided to the owner.
Quality Certification and Safety Standards
The heater will be UL or CGA listed. The water heaters will be manufactured by a company that has achieved certification to the ISO 9001 International Quality System.
PV 6319 4/04 | 2 |