Introduction
This chapter describes problems that can occur with the Océ TDS400 and how to correct the problems.
The following problems can occur on the Océ TDS400:
■Original jams in the scanner (see page 177).
■Paper jams in the printer (see page 179).
■Paper jams in the folder (see page 182)
■Problems with the reinforcement unit (see page 189)
Stickers on parts of the system indicate which green handles, green knobs, green bars and covers can be lifted, pressed or opened to remove the jammed material.
If you clear the error, the display gives the instruction on how to continue the job. Refer to ‘Error messages’ on page 44 for complete information about the error messages on the printer operator panel.
176 | Océ TDS400 User Manual |
