Key Operator settings
The Key Operator is responsible for correct default settings of the system. These settings include the default settings, and groups of default printer settings for the print and the copy jobs that again occur.
The Key Operator can define all timer settings, like the panel time out and the sleep mode time out.
Note: One Key Operator or System Administrator can log on to the Océ Settings Editor at the same time.
In order to perform special Key Operator functions, you must log on to the Océ Settings Editor as a Key Operator.
As these functions are restricted to a dedicated Key Operator, a password is required to access them. The service engineer will provide this password to you upon installation.
Note: When you are finished, make certain you log off from the Key Operator mode of the Océ Settings Editor to prevent unauthorized use of the Océ TDS400.
▼Make Key Operator settings in the Océ Settings Editor
1 maximise the Océ Settings Editor on the screen.
2 Log on as Key Operator.
3 Click on one of the top buttons to display the desired group of settings. 4 Select the setting you want to update in the tree structure.
5 Update the setting in the update area, as required.
Note: A few settings are made directly from the tree structure area.
6 Click on the ‘Apply’ button.
The new value is now applied for the setting
Log from the Key Operator mode when you have finished updating the settings.
Océ Power Logic®: The Settings Editor | 111 |
