Language

From the ‘View’ menu, select ‘Language’, to select one of the supported languages.

Note: The check mark in front of the language indicates that this is the active display language.

Set the languages

1From the ‘View’ menu, select ‘Language.

You have to change the display language setting in the Settings Editor, to change the languages in the scanner and printer operator panels, and in the local applications.

Help

Display help information

1Open the ‘Help’ menu and select ‘Contents’.

Now you can find help for all functions of the Océ Remote Logic® applications.

Command line parameters

In order to start the remote applications faster, there are 6 command line parameters available.

configfile=<config_file> Sets the configuration file to use.

server=server Sets the specified server as the server to connect to.

language1=lang Specifies the first language in combination with the parameter ‘country1=country’.

country1=country Specifies the first language in combination with the parameter ‘language1=language’.

language2=lang Specifies the second language in combination with the parameter ‘country2=country’.

140

Océ TDS400 User Manual

Page 140
Image 140
IBM TDS400 user manual Language, Help, Command line parameters