[13] Manual feed
3Enter the number of copies.
4Select the copy size.
5Feed the original.
6Press the Start key 
.
7Take your sheet of copy material to the side of the printer that contains the cassette tray (see Figure 13).
8Align the copy material with your hands to the format indication and the label on the manual feed table.
9Move the copy material forward in the cut of the roller. A paper bulge must appear over the full width of the page.
10Hold the paper with your hands until the printer pulls in the first part of the sheet.
The bulge decreases or disappears. After a few seconds, the printer pulls the complete sheet.
Note: If the copy job requires more sheets, the display indicates to feed the next sheet.
11Repeat the steps 7 to 10 to complete the job.
12Collect your output.
Note: The printer prints the image on the side of the sheet which is facing up.
Attention: When you feed a sheet of material in the manual feed while a normal print job runs, a media jam can occur.
62 | Océ TDS400 User Manual |
