IBM TDS400 user manual Maintenance of the reinforcement unit, Insert a new tape roll

Maintenance of the reinforcement unit

This section covers maintenance activities for the optional reinforcement unit of the folder, such as:

■Insert a new tape roll

■Empty the waste box

■Clean the reinforcement knives

Attention: To avoid damage to the reinforcement unit, only use the original reinforcement strips from Océ.

Insert a new tape roll

When the tape roll is empty while the printer is in stand-by, the following message will appear on the display: ‘RU tape empty’. Open the reinforcement unit and replace the empty tape roll.

▼ How to remove an empty tape roll

1 Open the side door of the reinforcement unit (see Figure 73).

[73] Opening the side door of the reinforcement unit

2Turn the two guide plates away from the pin roller and lock them into their open position (see Figure 74).

164 Océ TDS400 User Manual