Dell DL2000 Alert! Redundant, Memory disabled, Configuration does, Not support, Redundant memory

Table 1-7. System Messages

Message	Causes	Corrective Actions
Alert! Redundant	Installed memory modules	Ensure that all memory
memory disabled!	are not the same type and	modules are of the same
Memory	size; faulty memory	type and size and that they
configuration does	module(s).	are properly installed. If the
not support		problem persists, see
redundant memory.		"Troubleshooting System
		Memory" on page 142.

Attempting to	Remote Configuration
update Remote	request has been detected
Configuration.	and is being processed.
Please wait...

Wait until the process is complete.

BIOS Update	Remote BIOS update	Retry the BIOS update. If
Attempt Failed!	attempt failed.	problem persists, see
		"Getting Help" on page 167.

Caution! NVRAM_CLR	NVRAM_CLR jumper is
jumper is	installed. CMOS has been
installed on	cleared.
system board.

Remove NVRAM_CLR jumper. See Figure 6-1 for jumper location.

CPUs with	Microprocessors with	Ensure that all
different cache	different cache sizes are	microprocessors have the
sizes detected!	installed.	same cache size and that
		they are properly installed.
		See "Processors" on
		page 105.
Decreasing	Faulty or improperly	See "Troubleshooting
available memory	installed memory modules. System Memory" on
		page 142.

About Your System

33