Figure 3-24. Installing the Central Riser Board
2 | 3 |
|
1
4
5
1 | card guide (2) | 2 | release tab |
3 | central riser board | 4 | guide pins (2) |
5 | system board socket |
|
|
Installing the Central Riser Board
1Fitting the two guides over the guide pins on the system board, gently lower the central riser board until the board connector is firmly seated into the system board socket. See Figure
2Replace any PCI cards that were removed from the central riser. See "Installing an Expansion Card" on page 88.
3Replace the cable retention bracket. See "Installing the Cable Retention Bracket" on page 84.
