About Your System 21
NOTE: If your system fails to boot, press the System ID button for at least five
seconds until an error code appears on the LCD. Record the code, then see "Getting
Help" on page167.
Table 1-6. LCD Status Messages
Code Text Causes Corrective Actions
N/A SYSTEM NAME
A 62-character string that
can be defined by the user in
the System Setup program.
The SYSTEM NAME
displays under the
following conditions:
• The system is powered on.
• The power is off and
active POST errors are
displayed.
This message is for
information only.
You can change the system
ID and name in the
System Setup program.
See "Using the System
Setup Program" on
page45.
E1000 FAILSAFE,
Call Support
See "Getting Help" on
page167.
E1114 Temp Ambient Ambient system
temperature is out of
acceptable range.
See "Troubleshooting
System Cooling Problems"
on page140.
E1116 Temp Memory Memory has exceeded
acceptable temperature
and has been disabled to
prevent damage to the
components.
See "Troubleshooting
System Cooling Problems"
on page140.
E12
nn xx
PwrGd Specified voltage regulator
has failed.
See "Getting Help" on
page167.
E1210 CMOS Batt CMOS battery is missing,
or the voltage is out of
acceptable range.
See "Troubleshooting the
System Battery" on
page138.
E1229 CPU # VCORE Processor # VCORE
voltage regulator has
failed.
See "Getting Help" on
page167.
Book.book Page 21 Monday, September 14, 2009 12:57 PM