Dell DL2000 Start-up, Password using the System Password option and cannot be, Measurements

Table 2-7. System Security Screen Options (continued)

Option	Description
Password Status	Setting the Setup Password option to Enabled prevents the
	system password from being changed or disabled at system
	start-up.
	To lock the system password, assign a setup password in the
	Setup Password option and then change the Password Status
	option to Locked. In this state, you cannot change the system
	password using the System Password option and cannot be
	disabled at system start-up by pressing <Ctrl><Enter>.
	To unlock the system password, enter the setup password in the
	Setup Password field and then change the Password Status
	option to Unlocked. In this state, you can disable the system
	password at system start-up by pressing <Ctrl><Enter> and
	then change the password using the System Password option.
TPM Security	Sets the reporting of the Trusted Platform Module (TPM) in
(Off default)	the system.
	When set to Off (default), presence of the TPM is not reported
	to the operating system.
	When set to On with Pre-boot Measurements, the system
	reports the TPM to the operating system and stores the pre-boot
	measurements (compliant with Trusted Computing Group
	standards) to the TPM during POST.
	When set to On without Pre-boot Measurements, the system
	reports the TPM to the operating system and bypasses pre-boot
	measurements.
TPM Activation	Changes the operational state of the TPM.
	When set to Activate, the TPM is enabled and activated at
	default settings.
	When set to Deactivate, the TPM is disabled and deactivated.
	The No Change state initiates no action. The operational state
	of the TPM remains unchanged (all user settings for the TPM
	are preserved).
	NOTE: This field is read-only when TPM Security is set to Off.

54

Using the System Setup Program