Using Your System Password to Secure Your System

NOTE: If you have assigned a setup password (see "Using the Setup Password" on page 59), the system accepts your setup password as an alternate system password.

When the Password Status option is set to Unlocked, you have the option to leave the password security enabled or to disable the password security.

To leave the password security enabled:

1Turn on or reboot your system by pressing <Ctrl><Alt><Del>.

2Type your password and press <Enter>.

To disable the password security:

1Turn on or reboot your system by pressing <Ctrl><Alt><Del>.

2Type your password and press <Ctrl><Enter>.

When the Password Status option is set to Locked whenever you turn on your system or reboot your system by pressing <Ctrl><Alt><Del>, type your password and press <Enter> at the prompt.

After you type the correct system password and press <Enter>, your system operates as usual.

If an incorrect system password is entered, the system displays a message and prompts you to re-enter your password. You have three attempts to enter the correct password. After the third unsuccessful attempt, the system displays an error message showing the number of unsuccessful attempts and that the system has halted and will shut down. This message can alert you to an unauthorized person attempting to use your system.

Even after you shut down and restart the system, the error message continues to be displayed until the correct password is entered.

NOTE: You can use the Password Status option in conjunction with the

System Password and Setup Password options to further protect your system from unauthorized changes.

58

Using the System Setup Program

Page 58
Image 58
Dell DL2000 owner manual Using Your System Password to Secure Your System, Type your password and press Enter