Dell DL2000 Amount, System memory has, Changed, Time-of-day clock, Stopped, Pair is not

Table 1-7. System Messages (continued)

Message	Causes	Corrective Actions
The amount of	Memory has been added or	If memory has been added
system memory has	removed or a memory	or removed, this message is
changed	module may be faulty.	informative and can be
		ignored. If memory has not
		been added or removed,
		check the SEL to determine
		if single-bit or multi-bit
		errors were detected and
		replace the faulty memory
		module. See
		"Troubleshooting System
		Memory" on page 142.
Time-of-day clock	Faulty battery or faulty	See "Troubleshooting the
stopped	chip.	System Battery" on
		page 138.
The following DIMM	The specified DIMM(s)	Ensure that only Dell-
pair is not	are incompatible with the	qualified memory is used.
compatible with	system.	Dell recommends
the memory		purchasing memory upgrade
controller: DIMM x		kits directly from
and DIMM y		www.dell.com or your Dell
		sales agent to ensure
		compatibility.
The following	The specified DIMM(s)	Ensure that only ECC FBD1
DIMMs are not	are incompatible with the	memory is used. Dell
compatible: DIMM x	system.	recommends purchasing
and DIMM y		memory upgrade kits
		directly from www.dell.com
		or your Dell sales agent to
		ensure compatibility.
Time-of-day not	Incorrect Time or Date	Check the Time and Date
set - please run	settings; faulty system	settings. See "Using the
SETUP program	battery.	System Setup Program" on
		page 45. If the problem
		persists, replace the system
		battery. See "System Battery"
		on page 110.

About Your System

41