Dell DL2000 owner manual 125

NOTE: While removing the memory modules, record the memory module socket locations to ensure proper installation.

10Remove the heatsink(s) and microprocessor(s). See "Removing a Processor" on page 105.

11Remove the TOE key, if present. See Figure 6-2 for the location of the TOE key.

12Remove the sideplane. See "Removing the Sideplane Board" on page 116.

13Remove the SAS backplane. See "Removing the SAS Backplane Board" on page 118.

14Remove the system board:

a Pull the system-board tray riser release pin. See Figure 3-28.

b While pulling the release pin, slide the system-board tray toward the front of the chassis.

c Lift up the system-board tray and remove it from the chassis.

Installing System Components

125