5Remove the cable retention bracket from the right interior wall of the chassis. Push the blue release latch and push the bracket toward the front of the system until the bracket detaches from the chassis slots.

6Route the SATA cable in the cable channel in the right wall of the chassis and replace the cable bracket over the cable. See Figure 3-18.

Figure 3-18. SATA Cable Routing in the PowerVault DL2000

1

2

3

4

5

1

SATA_B connector on system board

2

SATA data cable

3

system fans

4

SATA power cable

5

optical drive

 

 

7Route the SATA cable along the top of the cable retention bracket to the central riser.

8Bend the cable behind the central riser and connect the cable to the SATA_A connector on the system board.

98

Installing System Components

Page 98
Image 98
Dell owner manual Sata Cable Routing in the PowerVault DL2000, System fans