Table 1-6. LCD Status Messages (continued)

Code

Text

Causes

Corrective Actions

 

 

 

 

E1811

HDD ## Rbld

The specified hard drive

See "Troubleshooting a

 

Abrt

has experienced a rebuild

Hard Drive" on page 146.

 

 

abort.

If the problem persists, see

 

 

 

your RAID

 

 

 

documentation.

 

 

 

 

E1812

HDD ##

The specified hard drive

Information only.

 

Removed

has been removed from

 

 

 

the system.

 

 

 

 

 

E1913

CPU &

The BMC firmware does

Update to the latest BMC

 

Firmware

not support the CPU.

firmware. See the BMC

 

Mismatch

 

User’s Guide for more

 

 

 

information on setup and

 

 

 

use of BMC.

 

 

 

 

E1A11

PCI Rsr

PCI risers are not

See "Expansion-Card Riser

 

Config

configured correctly; some

Boards" on page 112.

 

 

invalid configurations may

 

 

 

prevent the system from

 

 

 

powering on.

 

 

 

 

 

E1A12

PCI Rsr

One or all of the PCI risers

Information only.

 

Missing

is missing, preventing the

 

 

 

system from powering on.

 

E1A14 SAS Cable A SAS cable A is missing or bad.

Reseat the cable. If problem persists, replace cable. See "SAS Controller Daughter Card" on page 85.

E1A15 SAS Cable B SAS cable B is missing or bad.

Reseat the cable. If problem persists, replace cable. See "SAS Controller Daughter Card" on page 85.

E2010 No Memory

No memory is installed in

 

the system.

Install memory. See "Installing Memory Modules" on page 102.

About Your System

27

Page 27
Image 27
Dell DL2000 E1811 HDD ## Rbld, Abrt, E1812 HDD ##, Removed, E1913, Firmware, Mismatch, E1A11 PCI Rsr, Config, Missing