Dell DL2000 owner manual Replacing a Power Supply, Power-supply handle

Figure 3-7. Removing and Installing a Power Supply

1

2

3

1	locking tab	2	cable retention bracket
3	power-supply handle

Replacing a Power Supply

1With the power-supply handle in the extended position, slide the new power supply into the chassis. See Figure 3-7.

2Rotate the handle down until it is completely flush with the power-supply faceplate and the orange snap engages. See Figure 3-7.

3Insert the power cable through the cable retention bracket, connect the power cable to the power supply, and plug the cable into a power outlet.

NOTE: After installing a new power supply, allow several seconds for the system to recognize the power supply and determine whether it is working properly. The power supply status indicator will turn green to signify that the power supply is functioning properly. See Figure 1-4.

Installing System Components

77