Dell DL2000 PCIe Degraded Link, Width Error, Embedded, Bus#nn/Dev#nn/Funcn, Expected Link

Table 1-7. System Messages (continued)

Message	Causes	Corrective Actions
PCIe Degraded Link	Faulty or improperly	Reseat the PCIe card in the
Width Error:	installed PCIe card in the	specified slot number. See
Embedded	specified slot.	"Expansion Cards" on
Bus#nn/Dev#nn/Funcn		page 88. If the problem
Expected Link		persists, see "Getting Help"
		on page 167.
Width is n
Actual Link Width
is n
PCIe Degraded Link	Faulty or improperly	Reseat the PCIe card in the
Width Error: Slot n	installed PCIe card in the	specified slot number. See
Expected Link	specified slot.	"Expansion Cards" on
		page 88. If the problem
Width is n
		persists, see "Getting Help"
Actual Link Width
		on page 167.
is n
PCIe Training	Faulty or improperly	Reseat the PCIe card in the
Error: Embedded	installed PCIe card in the	specified slot number. See
Bus#nn/Dev#nn/Funcn	specified slot.	"Expansion Cards" on
PCIe Training		page 88. If the problem
		persists, see "Getting Help"
Error: Slot n
		on page 167.
PCI BIOS failed to	PCI device BIOS (Option	Reseat the expansion
install	ROM) checksum failure is	card(s). Ensure that all
	detected during	appropriate cables are
	shadowing.	securely connected to the
	Loose cables to expansion	expansion card(s). If the
	card(s); faulty or	problem persists, see
		"Troubleshooting Expansion
	improperly installed
		Cards" on page 149.
	expansion card(s).

Plug & Play	Error encountered in
Configuration	initializing PCI device;
Error	faulty system board.

Install the NVRAM_CLR jumper and reboot the system. See Figure 6-1 for jumper location. If the problem persists, see "Troubleshooting Expansion Cards" on page 149.

About Your System

39