SAS Controller Daughter Card Cabling Guidelines

Figure 3-13. SAS Controller Daughter Card Cabling With 3.5-inch x4 Backplane

2

1

3

4

5

1

SAS controller 0

2

SAS controller daughter card

3

SAS controller 1

4

SAS backplane A

5

3.5-inch x4 backplane

 

 

Removing a SAS Controller Daughter Card

1Disconnect the control panel cable. See "Removing the Control Panel Assembly" on page 122

2Disconnect any SAS cables from the card.

3Gently press down on the release tab while sliding the SAS controller daughter card in its tray away from the sideplane connector, freeing the chassis slots on the tray from the chassis hooks, and lifting the card from the system. See Figure 3-12.

Configuring the Boot Device

NOTE: System boot is not supported from an external device attached to a SAS or SCSI adapter. See support.dell.com for the latest support information about booting from external devices.

Installing System Components

87

Page 87
Image 87
Dell DL2000 owner manual Configuring the Boot Device, SAS Controller Daughter Card Cabling Guidelines