Dell DL2000 Diskette drive n, Seek failure, Diskette read, Failure, Diskette subsystem

Table 1-7. System Messages (continued)

Message	Causes	Corrective Actions
Diskette drive n	Incorrect configuration	Run the System Setup
seek failure	settings in the System	program to correct the
	Setup program.	settings. See "Using the
		System Setup Program" on
		page 45.
	Faulty or improperly	Replace the diskette. If the
	installed diskette drive.	problem persists, see
		"Troubleshooting an Optical
		Drive" on page 143.
	Loose tape drive interface	Reseat tape drive interface
	cable, or loose power cable. cable, or power cable. If the
		problem persists, see
		"Troubleshooting an Optical
		Drive" on page 143.
Diskette read	Faulty or improperly	Replace the diskette. See
failure	inserted diskette or tape	"Troubleshooting an Optical
	drive.	Drive" on page 143.
Diskette subsystem	Faulty or improperly	Replace the diskette or tape.
reset failed	installed diskette or tape	If the problem persists, see
	drive.	"Troubleshooting an Optical
		Drive" on page 143.

Drive not ready	Diskette missing from or
	improperly inserted in
	diskette drive.

Replace the diskette. If the problem persists, see "Troubleshooting an Optical Drive" on page 143.

Error: Incorrect	Mismatched or	Ensure that all pairs of
memory	unmatched DIMMs	memory modules are of the
configuration.	installed; faulty or	same type and size and that
DIMMs must be	improperly seated memory	they are properly installed.
installed in pairs	module(s).	See "System Memory" on
of matched memory		page 100. If the problem
size, speed, and		persists, see
technology.		"Troubleshooting System
		Memory" on page 142.

About Your System

35