PROGRAMMING FEATURES
Programming Mode FAQ
1.I got distracted while programming and forgot which feature I was programming. What should I do?
Return to 'Idle' Programming Mode and start over.
•Long press the PTT button. The radio will return to the 'Idle' Programming Mode or,
•Turn OFF the radio and enter Programming Mode again (see instructions in the beginning of this section)
2.I am trying to program a frequency (or code) value but the radio would not do it. It rolled over and took me back to value ‘0’.
The radio will not allow you to program any values that are not available in the frequencies and codes pool. For example, if you try to program code 128, the radio would not accept it, as the maximum value allowed is 122. Same thing will happen with frequencies. Check the Frequencies and Codes Charts section to make sure you are programming a valid number.
3.I am trying to enter the Programming Mode but the radio would not do it.
The radio might be locked using the CPS to not allow Front Panel Programming. To
English 40
