Motorola RMU2040 manual Cloning Radios, Cloning with a Multi Unit Charger MUC

CLONING RADIOS

You can clone RM Series radio profiles from one Source radio to a Target radio by using any one of these 3 methods:

•Using a Multi Unit Charger (MUC - optional accessory),

•Two Single Unit Chargers (SUC) and a Radio-to- Radio cloning cable (optional accessory),

•the CPS (free software download) and CPS programming cable ((optional accessory).

Cloning with a Multi Unit Charger (MUC)

To clone radios using the MUC, there must be at least two radios:

•a Source radio (radio which profiles will be cloned

or copied from) and

•a Target radio (the radio which profile will be cloned from the source radio.)

The Source radio has to be in Pocket 1 or 4 while the Target radio has to be in Pocket 2 or 5, matching in the MUCs pockets by pairs as follows:

•1 and 2 or,

•4 and 5

When cloning, the MUC does not need to be plugged into a power source, but ALL radios require charged batteries.

1.Turn ON the Target radio and place it into one of the MUC Target Pockets

2.Power the Source radio following the sequence below:

•Long press the PTT button and SB2 simultaneously while turning the radio ON.

PROGRAMMING FEATURES

49English