Runco SC-50D, SC-60D Vertical and Horizontal, Position, Ceiling Installation, Floor Installation

Installation

Proper placement of the projector relative to the screen will yield a rectangular,	Vertical and Horizontal
perfectly-centered image that completely fills the screen.	Position
Ideally, the projector should be positioned perpendicular to the screen and in such a way
that the lens center is aligned with either the top or bottom edge of the screen area, and
centered horizontally. See Figure 3-2.

Ceiling Installation

Ceiling

Height Projection Distance

x

Lens Center

Lens Center

Screen

Floor Installation

Height

Lens Center

x

Screen

Lens Center

Projection Distance

Floor

Figure 3-2. Projector Placement

You can use the lens shift controls to center the image on the screen. Lens shift is generally expressed as a percentage of the screen height or width, as shown in Figure 3-3and Figure 3-4.

Screen Center

0%

50% Height

Lens Shift

(0.5 x H)

100% Height

Lens Shift

(1.0 x H)

Vertical and Horizontal Lens Shift

Note: This is a general example of lens shift. Lenses vary in their shift capabilities. No particular

lens or projector is used in this example.

Figure 3-3. Vertical Lens Shift (EXAMPLE ONLY)

Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual 19