Runco SC-50D, SC-60D operation manual Remote Aspect Ratio Control Description Key, Native

Operation

Table 4-1. Aspect Ratio Settings (continued)

	Remote
Aspect Ratio	Control		Description
	Key
Cinema	CINEMA			Select Cinema to view 2.35
				source material in its native
				aspect ratio.
				With a 16:9 screen and a
				standard SC-50d/SC-60d
		2.35:1 Image on		(without an anamorphic lens),
				the upper and lower portions of
		16:9 Screen
		(Cinema aspect ratio / no CineWide)		the screen are masked, but the
				geometry of the active image
				area is unchanged.
				With a 2.35:1 screen and an
		2.35:1 Image on
				anamorphic lens, the DHD
		2.35:1 Screen
		(Cinema aspect ratio / CineWide)		Controller scales the 2.35:1
				image so that the active image
				area fills the 16:9 chip surface,
				eliminating the black bars. The
				secondary, anamorphic lens
				then restores the proper
				geometry to the 2.35:1 image.
Virtual Cinema	V-CINE			A 16:9 image is scaled
				NON-linearly (more on the sides
		16:9 IImage on		than in the center) to fit a 2.35:1
		22..35:1 Screen		screen.

16:9 Image on

2.35:1 Screen with

Virtual Cinema

Native	NATIVE		Select Native to display the
			source signal in its native
			resolution, centered in the
		1080i HDTV Image	display area with no re-sizing or
			overscan.

720p HDTV Image

This means, for example, that 720p HDTV programs will display with unused pixels on all sides: 320 on the left and right sides and 180 above and below.

With SDTV and EDTV sources, the DHD Controller scales the image horizontally to achieve a 16:9 aspect ratio.

Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual 55