Runco SC-60D, SC-50D operation manual Serial Commands, Input Selection Commands

External Control

Table 6-1lists the RS-232 command set. The “Parameter (min/max)” column shows the valid parameter ranges, or “NA” for commands that take no parameters.

When you enter a valid command, the DHD Controller executes it and acknowledges it with a plus sign on the command line (+ >). When you enter an invalid command – one that is misspelled or followed by values outside the valid range for that command – the DHD Controller ignores it and returns a minus sign (- >).

Table 6-1. Serial Commands

Command	Parameter	Value	Description
	(min/max)	Stored?
	Power On/Off Commands
OFF	NA	NA	Turns projector off
ON	NA	NA	Turns projector on
POWER	0/1	NA	Turns projector on and off
POWER?	NA	NA	Returns power status
	Input Selection Commands
COMPONENT	NA	YES	Selects the Component input
COMPOSITE	NA	YES	Selects the Composite 1 video input
or
COMPOSITE1
COMPOSITE2	NA	YES	Selects the Composite 2 video input
COMPOSITE3	NA	YES	Selects the Composite 3 video input
HDMI1	NA	YES	Selects the HDMI 1 input
HDMI2	NA	YES	Selects the HDMI 2 input
HDMI3	NA	YES	Selects the HDMI 3 input
HDMI4	NA	YES	Selects the HDMI 4 input
HD1	NA	YES	Selects the RGB HD 1 input
HD2	NA	YES	Selects the RGB HD 2 input
INPUT?	NA	NA	Returns active input
SCART	NA	YES	Selects the SCART input

86 Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual