Runco SC-60D 3.13, Working With the, Lamp, Verify Proper Image, Alignment with, Anamorphic Lens

Installation

Focus: Finally, rotate the Focus Ring on the anamorphic
lens to fine-tune the optical focus.	S

U

C

O

F

Verify Proper Image ➤	After you have installed the anamorphic lens, ensure that the 2.35:1 image corners and
Alignment with	edges are aligned with the screen with no geometric distortion. Use the Image Alignment
Anamorphic Lens	controls to make any necessary adjustments (refer to Adjusting the Image Geometry
	on page 43).
3.13	At this point you may want to check and adjust the following settings to optimize lamp
Working With the	performance:
Lamp	• Choose a lamp mode for regulating power and light output.
	• Change the optical aperture size.
	To access them, choose Calibration from the Main Menu and enter the Calibration menu
	passcode. Then, choose Display Color -> Lamp (refer to Lamp on page 66) or Display
	Color -> RVR (refer to RVR on page 68).

50 Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual