Mono Mount, Installation Overview, Included Items | Invacare IMX1

3 MONO MOUNT

3 Mono Mount

3.1Installation Overview

If any of the hardware is missing or misplaced, please contact our customer service department and arrangements will be made to send you the necessary replacements.

Invacare

USA: 800-333-6900

Canada: 800-668-5324

Motion Concepts Canada: 866-748-7943 USA: 888-433-6818

Included Items

•Back Shell with Foam and Cover

•Rigidizer Bracket

•Tracking Plate

•Band Clamp Assemblies

3.2Tools Required

• Tape measure/ruler

• 4mm hex key (provided)

3.3 Before Installation

WARNING

Before beginning the installation process, please fully read through the instructions to understand the steps and adjustments involved. If you have any questions or concerns during the installation process, please contact our customer service department.

Invacare® Matrx® MX1

8

Part No. 1171914

Image 8

Invacare IMX1 user manual Mono Mount, Installation Overview, Included Items, Tools Required, Before Installation

Contents

Invacare Matrx MX1 Model IMX1 Invacare Matrx MX1 Contents Symbols GeneralOverview Important Information Invacare Matrx MX1 Limited Warranty North America Outer Cover Safety Installation InformationGeneral Guidelines Intended Use Weight Limitation and Model NumbersWARNING Operating Information Installation Overview Before InstallationMono Mount Included Items Installing the Mounting Hardware Inch 23 cm Tall MX1 Back Cushions Only Carefully slide the rigidizer bracket onto the band clamp Band clamp in place Installing the Tracking Plate on the Back Shell Installing the Back Shell onto the Mounting Hardware Adjusting the Back Height Adjusting the Back Angle Removing the Mono Mount Hardware Our customer service department Fixed Dual Mount Clamp Body Adjustment Repeat Steps 1-3 for the opposite side Installing the Band Clamps Installing the Back Fixed Dual Mount Adjust the back to the desired height Loosen the compression bar hardware a Loosen the screws a on the side of both clamp bodies B Adjusting the Back Angle and Back DepthAfter Installation Quick Release Dual Mount Loosening the Compression Bar Securing the Clamp Body to the Band Clamp Securing the Clamp Body Assembly to the Back Cane Inside View Adjusting the Back Height Removing the Back Cushion Installing/Adjusting the Lumbar Support Plug Inserts OptionsAdhesive Pads Mounting holes B on the back shell C Installing the Optional Privacy Flap Width Maintenance Cleaning General CleaningLaundering Inspection Usability Survey TRD0283 USA